Download and try LinkCAD DXF, GDSII, CIF, PostScript Translator now for free!
|
Use circular interpolation |
Use Gerber circular interpolation to draw arcs and circles. |
|
Use lines & |
Convert arcs and circles to polylines. Select the number of segments per 360° or an absolute tolerance value. |
|
Default line width |
Specifies the pen with used to draw zero-width open polylines. |
|
Use step & repeat |
Instructs LinkCAD to save space by using the Gerber RS-274X step & repeat command. This option may not be supported by all Gerber compatible programs. |
|
Circular apertures |
Specifies the maximum size for circular apertures. Circles whose diameter exceeds the specified limit are written as regular geometries. |
|
Rectangular apertures |
Specifies the maximum size for rectangular apertures. Rectangles whose edge length exceeds the specified limit are written as regular geometries. |
|
These options define the coordinate format of the Gerber data. |
|
EOB character |
Specifies the End-Of-Block character used to delimit the records in the Gerber file. The default is an asterisk ("*"). |
|
Parameter delimiter |
Specifies the Gerber parameter delimiter. The default is the percentage sign ("%"). |
|
Line breaks |
Select if DOS/Windows compatible (CR/LF), UNIX compatible (LF) or no line breaks should be used to separate blocks of Gerber data. |